Gears

Feed pinion, drive pinion and intermediate pinion for Mechafin wire feeders

The drive pinion is the heart of the drive. It is connected to the drive shaft and transmits the driving force to the intermediate pinions or directly to the feed pinions.

In the design, the number of teeth on the pinion is kept as small as possible for reasons of construction volume. At the same time, however, the number of teeth must be sufficiently large so that no undercut occurs and the overlap is sufficiently large for the benefit of smooth running. In addition, the pinion as a drive element should be chosen slightly wider than the driven wheel.

Mechafin pinions have been distinguished for over 50 years by their high precision, which is reflected in their smooth running. They are available with bronze bushings or needle bearings, burnished, nickel-plated, polished or unpolished. Drive pinions are available with or without insulation.

9 Items

Sort by sort-descending
Main Gear Drive isolated, nickel plated
Main Gear Drive isolated, nickel plated
Main gear drive Ø 30mm, distance 17.0mm
Article Number : 115203
VPE: 1
Main Gear Drive isolated, nickel plated
Main Gear Drive isolated, nickel plated
Main gear drive Ø 30mm, distance 12.5mm
Article Number : 115206
VPE: 1
Adaptor isolated
Adaptor isolated
Main gear drive Ø 30mm, distance 12.5mm
Article Number : 116803
VPE: 1
Main Gear Drive isolated, black-finish
Main Gear Drive isolated, black-finish
Main gear drive Ø 37mm, distance 12.5mm
Article Number : 118270
VPE: 1
Main Gear Drive isolated, nickel plated
Main Gear Drive isolated, nickel plated
Main gear drive Ø 37mm, distance 17.0mm
Article Number : 114983
VPE: 1
Main Gear Drive isolated, nickel plated
Main Gear Drive isolated, nickel plated
Main gear drive Ø 37mm, distance 17.0mm
Article Number : 115216
VPE: 1
Main Gear Drive isolated, black-finish
Main Gear Drive isolated, black-finish
Main gear drive Ø 40mm, distance 12.5mm
Article Number : 118258
VPE: 1
Main Gear Drive isolated, nickel plated
Main Gear Drive isolated, nickel plated
Main gear drive Ø 40mm, distance 17.0mm
Article Number : 115130
VPE: 1
Main Gear Drive isolated, nickel plated
Main Gear Drive isolated, nickel plated
Main gear drive Ø 40mm, distance 17.0mm
Article Number : 115214
VPE: 1
per page

We are pleased to help you

Mechafin AG, based in Geroldswil, a suburb of Zurich, was founded in 1965 by Otto Schoch. It specialised early on in the development and production of shielding gas welding torches and wire feeders for demanding tasks. "The increased requirements of our customers are our daily challenge and motivation."

loader
Loading...